This question is regarding Mira Element - Exposed (pre-2018) - Shower Spares

temperature problems

Not enough hot water; filter checked and new cartridge inserted, temperature adjustment done iaw instructions. still not enough hot water.
Asked 6 years ago by Paul
If the temperature is too cold and you have
a combination type boiler it may not be
producing sufficiently hot water at desired
flow rate (refer to ‘
Specifications’).
Fit flow
regulator (supplied) to shower valve outlet.

Answered 6 years ago by Barrie Seabright

Hi I have a R25/35 HE combi... I am unable to locate the fit flow regulator. Can you please give further details. The hot water flow rate was set to max.
Thanks

Answered 6 years ago by Paul Brownhill

www.showerdoc.com/mira-component-pack-1062471

The flow regulator is shown at the bottom of the box marked as 13 , and is fitted inside the hose to reduce the flow rate.

Answered 6 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Element - Exposed (pre-2018) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Exposed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Exposed Shower Valves

For any other support request please get in touch.