Low Flow Light On

My Elite 2 Has the low flow light on until the heat knob is turned fully hot. It only then supplys hot water, however it is too hot to shower in
Asked 13 years ago by Anonymous
Check the inlet filter is clear and that the water supply is ok.
If so check the pump is functioning correctly, if not it needs replacing.
If above ok then it is likely to be a faulty flow valve assy.
Required parts can be ordered online via the link below.

http://www.showerdoc.com/shower-spares/mira/MIRA-PARENT-8-Mira-Elite-2

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Elite 2 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Pumped Electric Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Pumped Electric

For any other support request please get in touch.