This question is regarding Mira Elite 2 - Shower Spares

Low Flow warning light

Just replaced the Mira Switching Assembly 1563.509 and the Mira Flow Valve Assembly 1563.507 on my Mira Elite 2 and the low flow warning light comes on immediately you switch the shower on and there is no hot water. The flow of water from the head seems to be as strong as ever.



Any ideas please?
Asked 12 years ago by James

This fault is normally caused by the paddles at the top of theflow valve not lining up correctly with the switching assembly.

There small locating pins in the case that the switchingassembly should fit on to, just slacken the flow valve and switching assemblyoff, give them a wiggle and you may feel them drop into place

 

Answered 12 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Elite 2 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Pumped Electric Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Pumped Electric

For any other support request please get in touch.