This question is regarding Mira Elite 2 - Shower Spares

mira elite 2

pump working but no hot water even when dials are turned up full
Asked 13 years ago by Anonymous
Check the thermal cut out on top of the heating for continuity and if open circuit it needs replaced, it can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/mira/MIRA-416-41-Mira-Thermal-Switch---416-41

If the thermal cut out is ok then check resistance of the heating elements, they shoul read 11 to 18 ohms, if not then a new heating can is required, it can be ordered using this link.

http://www.showerdoc.com/shower-spares/mira/MIRA-1563-504-Mira-Heater-Tank-9-8-Kw-(9-0-Kw-230-V-Ac)-1563-504

If elements are ok then with shower running check there is power to the elements and if not then it is either a microswitch or the flow valve at fault. either of these can be ordered via this link.

http://www.showerdoc.com/shower-spares/mira/MIRA-PARENT-8-Mira-Elite-2

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Elite 2 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Pumped Electric Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Pumped Electric

For any other support request please get in touch.