This question is regarding Mira Elite 2 - Shower Spares

no water flow

We had our water turned off and we turned on the shower but the tank was empty but since we turned the water back on theres no water flowing from the shower, any suggestions??
Asked 11 years ago by Anonymous

First check that the inlet filter is clear and that there is water getting to the shower(You could have an air lock) if that is OK then and the motor and pump are running then you will probably need to replace the flow valve assembly

http://www.showerdoc.com/mira-flow-valve-assembly-1563-507

 

Answered 11 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Elite 2 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Pumped Electric Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Pumped Electric

For any other support request please get in touch.