This question is regarding Mira Elite ST - Shower Spares

boiling noise when switching off

RE: Mira Elite ST Runs normal for about 3 minutes, then cold.(Lo flow light does Not come on) It then returns to hot after a minute or so. When switching off it makes a noise like a kettle boiling. The TCO seems to be working fine. Water input is good. Previous posts here suggest that is a micro-switch issue. Could you please advise how to test and replace the micro-switch. I searched for a video but the link does not work. Thank you...
Asked 7 years ago by Ian
Hi Ian,

You are correct that the TCO is working ok. if the shower continues to cut the TCO in then it will eventually stay cold and not reset.

It does sound like one of the micro switches that shuts down the elements is faulty, and this is why you can here the boiling noise after you have switched the shower off.

You will need to check items 7 / 8( Micro switches) from the spares list in this link provided - www.showerdoc.com/mira-elite-st-shower-spares

Answered 7 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Elite ST - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Pumped Electric Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Pumped Electric

For any other support request please get in touch.