This question is regarding Mira Enhance Shower Pump (From 02/05 - 03/08) - Spare Parts

Application

Can this pump be fitted to a separate 22mm feed at the cylinder supplying hot water to a basin, bath and shower mixer valve. The Mira Coda bar mixer has a cold supply from roof space above whilst hot is fed below floor from Bath feed. Static head approx 0.1 bar.
Asked 7 years ago by Johne
No this pump will not do what you require also it is now obsolete.

Below is a link to all our pumps, there are hundreds!

But to give you an idea of where to start you probably want a 1.5 to 2bar pump twin ended one end for the hot and one for the cold.

If you get further down the road and need more help then get back to us.

Answered 7 years ago by George Thomson

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Enhance Shower Pump (From 02/05 - 03/08) - Spare Parts

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Shower Pumps Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Shower Pumps

For any other support request please get in touch.