This question is regarding Mira Escape - Shower Spares

Mira Escape - Tripping out

My questionf of 23rd April suggested checking the solenoid. We've done this today and the reading is k3.68ohm. On testing the shower, the unit still tripped immediately though. What other tests may we go through to fault find and solve the problem? Any advice would be appreciated.



Thanks
Asked 11 years ago by P

As theother things have been checked it is almost certainly a faulty element in theheating tank (there are two, three in most 10kw showers) you can check themwith a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elementsand no heat it's probably the elements, no power to the elements thenit's probably a micro switch.

 http://www.youtube.com/watch?v=wzPt1hsfVq4&feature=player_embedded

Answered 11 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Escape - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.