This question is regarding Mira Escape - Shower Spares

Mira Escape

Mira escape power light on and low flow light on - water does not come on. Changing the the setting has no effect except the low flow goes out but no water comes through. Pressure of water is good and filter has been checked. Water was coming through the shower head really well before it stopped working. Most likely problem part would be appreciated.
Asked 12 years ago by Anonymous
I think you need a new flow valve assembly.

http://www.showerdoc.com/shower-spares/mira/MIRA-1563-540-Mira-Flow-Valve---Inlet-Assembly-1563-540 

Answered 12 years ago by The Shower Doctor

Most likely cause is a failed solenoid.



Carefully slide the lower light from the on/off switch. Place

meter leads on Live & Neutral spade connections to solenoid,

located underneath the on/off switch.

Press the switch. If 240 volts shows then the solenoid has failed. Part is 416.51 from memory.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Escape - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.