This question is regarding Mira Essentials Electric Shower - Post 2000 - Shower Spares

Little water flow

I have stripped the inlet valve as described and found that my problem is the pin which open/closes the valve. It seems not to open the valve fully and so little water flow. I have tried packing the end so the spindle pushes the pin in more and works but when it is turned off there is a trickle of water from the shower!

You mention changing the assembly for a new one but change the spindle, would this old spindle on a new part solve my problem?



Thanks
Asked 11 years ago by James
Yes you need a new pilot valve and may need to change over the spindle, which is a straight forward job.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Essentials Electric Shower - Post 2000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.