This question is regarding Mira Essentials Electric Shower - Post 2004 - Shower Spares

Low Flow when Hot

Hi, my Mira 9.5 pressure dropped by about 1/2 when hot- it seemed logical that an element had gone, so I changed the heater- I was wrong, the old one was fine and so the fault remains. The other pressure from taps in the en-suite is strong and with the heater dial fully anti-clockwise (COLD) I have full power water pressure. When rotating the dial the water gets hot (and can go "too hot" when fully clockwise), but at usual temps the pressure is about half what it used to be. The low/mid/high buttons do make a difference, suggesting the switches are OK. Should I change the flow control? Or check something else? Cheers
Asked 6 years ago by Dave
www.showerdoc.com/mira-essentials-go-vie-9-5kw-10-8kw-flow-regulator-assembly-439-78

The part above may be faulty by what you are saying.

Answered 6 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Essentials Electric Shower - Post 2004 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.