This question is regarding Mira Essentials Manual Power Shower - post 2002 - Shower Spares

Water slows but does not turn off

Turning the outer bezel clockwise reduces the pressure but does not stop the flow entirely.



Bezel can now rotate past original stop position and if turned far enough will alter shower pressure again.



Cutting power at the breaker unit stops the flow.



Please advise what spares are required to fix.
Asked 11 years ago by Anonymous
You may have a faulty item as shown below, or the area it is attached to could be broken. If this is not the case then you need to test if the solenoid is at fault.

www.showerdoc.com/shower-spares/mira/power-showers/mira-453-12-mira-harness-assembly-–-concentric-–-components-identified-c-453-12

www.showerdoc.com/shower-spares/mira/power-showers/mira-453-13-mira-solenoid-valve-assembly-–-components-identified-d-453-13

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Essentials Manual Power Shower - post 2002 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Power Showers

For any other support request please get in touch.