This question is regarding Mira Essentials Thermostatic Power Shower - post 2002 - Shower Spares

Mira Event Thermostatic motor/pump noise

The motor/pump is making an intermittent noise as if the motor is struggling to work. Took the cover off and the inside is covered in a black powder. Pressure seems to be down as well. Shower installed about 4 years ago. Motor assembly has these details: Pn 6.1532.307.3.0; Clss F; /Rev 02. Water temp 65 degrees - 26.03.2008. Is it just the motor brushed that need replacing or the whole motor unit?

Thanks
Asked 11 years ago by Anonymous
First check that the inlet filters , head and hose are clear.

Also check that there is enough water getting to the shower.

If all is well changing the brushes may solve the problem unless the shaft is the problem then a new motor would be needed.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Essentials Thermostatic Power Shower - post 2002 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Power Showers

For any other support request please get in touch.