This question is regarding Mira Essentials Thermostatic Power Shower - post 2002 - Shower Spares

replacement brushes for essential power shower

How do I remove/loosen the pump motor enough to be able to remove and replace the brushes?
Asked 8 years ago by Roger
You will need to remove the pump.

Turn the water and power off you will need to remove the clip between the solenoid and pump and remove the screws on the inlet pipe to the solenoid also undo the hose and clips at the pump outlet.

Then ease it forward and upward taking care to grip the stabilising bracket at the top of the pump.

Answered 8 years ago by Anonymous

Many thanks for your assistance. I hope it is as easy as it sounds!.
Once again thank you.

Answered 8 years ago by Roger Gilbey

www.showerdoc.com/mira-essentials-thermostatic-power-shower-post-2002-shower-spares

If you lift part "A" in the diagram the motor will come forward.

Answered 8 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Essentials Thermostatic Power Shower - post 2002 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Power Showers

For any other support request please get in touch.