This question is regarding Mira Essentials Thermostatic Power Shower - post 2002 - Shower Spares

worked fine and then no water output

Was cleaning bathroom and using shower head to rinse walls down, stopped the shower to clean another area, and upon restarting it couple mins later, the motor spins up but there is little more than a dribble on EITHER hot or cold thermostat settings. Have checked the inline filter and removed the hose completely and still nothing really. There appears to be no change in the motor noise or speed of operation, there's just nothing coming out. What do you reckon please ?



I think it came from B&Q about 9-10 years ago ... is the Mira Vigour T white . chrome a direct replacement for water connections etc ? http://www.showerdoc.com/mira-vigour-t-thermostatic-power-shower-white-chrome
Asked 9 years ago by Anonymous
www.showerdoc.com/solenoid-coil-universal-no-valve-hydr-27600

You need to test your solenoid to see if it is faulty, the above video shows you how.

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Essentials Thermostatic Power Shower - post 2002 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Power Showers

For any other support request please get in touch.