This question is regarding Mira Event (Thermostatic) - post 1996 - Shower Spares

Intermittent pump failure

Hello. For several years now the pump of our 1999 Event T has worked intermittently. Occasionally it works like new, normally it comes up to about half speed perhaps 10 seconds after switched on to full, sometimes only after given a bit of a thump. Now every couple of weeks it doesn't come on at all; the water just dribbles out at the right temperature. Can you please diagnose and prescribe? Thanks a lot. Joe
Asked 11 years ago by Emma
Most likely to be the motor/pump assy at fault, it can be ordered online byclicking on the link below.

http://www.showerdoc.com/shower-spares/mira/MIRA-211-60-Thermostatic-Pump-Assembly

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Event (Thermostatic) - post 1996 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Power Showers

For any other support request please get in touch.