This question is regarding Mira Event (Thermostatic) - post 1996 - Shower Spares

Motor brush replacement

Hi. Just come to replace the motor brushes I purchased from you last Friday & have a problem. The original brushes slide in a brass casement and are slimmer than the replacement ones recieved and so will not fit. Removing the sleeve will allow the new brush to go in it's place but is then too long.

The motor is dated 07/10/2004 pt no: 6.1532.307.2.0

Rgds Neil

Asked 9 years ago by Anonymous

www.showerdoc.com/sintech-motor-carbon-brushes-pair-in-brass-casing-01102

You may have bought the wrong type.

These are the correct ones, in the brass casings.

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Event (Thermostatic) - post 1996 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Power Showers

For any other support request please get in touch.