This question is regarding Mira Event XS Manual - Shower Spares

Mira Event XS Manual Losing power

Hi

We have the above shower unit, about 3 years old now. Recently when we try and take a shower the water comes through ok but starts to get very hot. When you try and turn the temperature knob to allow more cold water into the mix, the cold water eventually stops flowing. In the end no hot or cold water comes outs the shower head, you can just hear the motor running. When you turn the knob back down to allow more hot water, it comes out very hot, but once again no cold water flows.

Please can you help ?

Thankyou
Asked 13 years ago by Mahesh

Hi

First check that the shower head is clean and clear also check the hose, they can look OK on the outside but they can collapse internally.

If these are both OK then there are filters in the shower you will have to remove these and make sure that these are clean.

See attached

Make sure you turn the water and power off first!

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Event XS Manual - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Power Showers

For any other support request please get in touch.