This question is regarding Mira Event XS Thermostatic - Shower Spares

Pump/motor runs but no water

Shower working normally, then water dies away. Tried again but no water. Tried a further time a few hours later and all seemed to be working OK. Then water died away to zero flow, but pump still running. Checked filters (OK), read your site and checked solenoid (has a resistance of c. 1 MegaOhm). I am assuming a faulty solenoid has a higher resistance than your quote for a working one (c. 3.5 K Ohm).

Is this correct ?
Asked 12 years ago by Anonymous
You are correct the solenoid has failed , replacement can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/mira/MIRA-453-13-Mira-Solenoid-Valve-Assembly-–-Components-Identified-D-453-13

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Event XS Thermostatic - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Power Showers

For any other support request please get in touch.