This question is regarding Mira Event XS Thermostatic - Shower Spares

Solenoid Valve 453.13

Minimal flow from my Mira Event XS. Inlet water supply OK, inlet filters clean, motor running normally, flexible hose and head clean. Solenoid measured 3.8K and receiving 230Vac. Changed solenoid valve and now flow is normal. Dismantled old valve (spring, plunger, plastic disc with gasket) but could not find anything wrong but clearly does not open when 230Vac applied. Any ideas?
Asked 8 years ago by Terry
According to the manufacturer Mira -

It could be the magnet on the inside of the solenoid has become de-energized and was not opening fully when power was supplied.

If you need any further assistance, please do not hesitate to contact us.

Answered 8 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Event XS Thermostatic - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Power Showers

For any other support request please get in touch.