This question is regarding Mira Event XS Thermostatic - Shower Spares

Water flows but not being pumping

Hi, My Mira Event XS power shower is intermittently not pumping water. Water is flowing through still but it is just not being pumped. I have uploaded 2 videos (need to turn sound up a bit). First one with the cover on the pump was still working but is really struggling and the noise off it doesn't sound too good. https://streamable.com/ye8648 Second one is about 15 mins later after I took the case off to have a look inside and then it was no longer pumping at all... https://streamable.com/hjmk78 Does it mean the pump has to be replaced? Thanks
Asked 3 years ago by Andrew Robinson, Reading
From the video it sounds like the motor and pump unit is stuck.

The options are a new motor and pump unit, replace the brushes, although from what I can see the brushes look OK (But I can't see very well)

Switch the power off give the top and bottom bearing a spray with WD40 (Don't over do it!) ease the motor round using your fingers or a screwdriver to let it soak in , then give it a try it may keep it going as a temporary measure

Answered 3 years ago by George Thomson

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Event XS Thermostatic - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Power Showers

For any other support request please get in touch.