boiler not switching on when shower turned on
Check that the inside of the hose hasn’t collapsed, and thehead is clear, this could be blocking the supply
Have you fitted the cartridge the correct way round?(normally hot to the left and cold to the right as you look at it )
The other thought is to remove the cartridge and flush thepipe work out see below
This will take two!
If your valve is recessed pack an old poly bag round thevalve to divert the water into your Bath / shower tray then turn the hot andcold valves on one at a time and allow the water to flush through for about15>20 seconds.
The person who is helping you should watch that the wateris not going anywhere that is going to do any damage also they should watchthat the amount of water coming from the hot and cold they should be roughlythe same.
If you do these checks and you still have a problem then wecan replace the cartridge .......Having said that this is a very unusual fault.
Answered 12 years ago by Anonymous
View Product and Order Online:
Mira Excel/Select Thermostatic Cartridge Assembly - 903.33
Do you require any further help with Tap or Shower Cartridges?
Please click the following link if you would like to see other answers or ask a question regarding the Mira Excel/Select Thermostatic Cartridge - 903.33
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Cartridges page. Alternatively, if you're looking for any other brands you should view our full range of Cartridges.
If you would like to buy this cartridge or look others from the same brand, please view our Replacement Mira Cartridges (All)
For any other support request please get in touch.