Mira shower cartridge

Is it possible to remove the cartridge without removing the body of the shower
Asked 11 years ago by Anonymous

To replace the cartridge Pre 2003units

Turn off hot and cold water supply

Pull front temperature knob off Therest of the knob assy. just unclips

Remove 4 screws that hold cartridgeinto body

Pull old cartridge forward shouldn'tbe too tight

Set new cartridge for High/Lowpressure (instructions with cartridge)

Slip new cartridge into placeremember to check that the new seals are all in place (and don't drop out as youpush back)

Tighten screws be careful not to overtighten

Refit knobs.

Turn on water and test. (Occasionallyyou will have to reset the cartridge temperature, instructions withcartridge)

Easy peasy!!!!

CartridgeMira 903.33 This cartridgesupersedes the previous high and low pressure versions

Link tocartridge:

http://www.showerdoc.com/shower-spares/mira/MIRA-903-33-Cartridge-Assembly-(Up-To-2003---Black)-Comes-with-

Answered 11 years ago by Anonymous

View Product and Order Online:

Do you require any further help with Tap or Shower Cartridges?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Excel/Select Thermostatic Cartridge - 903.33

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Cartridges page. Alternatively, if you're looking for any other brands you should view our full range of Cartridges.

If you would like to buy this cartridge or look others from the same brand, please view our Replacement Mira Cartridges (All)

For any other support request please get in touch.