Mira Excel Cold
I can only get cold water and the screens are clean!
Regards,
J D
Hi
If you have problems with an Excel then it's best just to replace the cartridge, however it is probably worth stripping the cartridge out and checking that the inlet filters are clean, before buying a new cartridge.
To replace the cartridge Pre 2003 units
Turn off hot and cold water supply
Pull front temperature knob off The rest of the knob assy. just unclips
Remove 4 screws that hold cartridge into body
Pull old cartridge forward shouldn't be too tight
Set new cartridge for High/Low pressure (instructions with cartridge)
Slip new cartridge into place remember to check that the new seals are all in place (and don't drop out as you push back)
Tighten screws be careful not to over tighten
Refit knobs.
Turn on water and test. (Occasionally you will have to reset the cartridge temperature, instructions with cartridge)
Easy peasy!!!!
Cartridge Mira 903.33 This cartridge supersedes the previous high and low pressure versions
Link to cartridge
Answered 13 years ago by The Shower Doctor
View Spares and Order Parts:
Mira Excel B - post 1996 Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Mira Excel B - post 1996 - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Exposed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Exposed Shower Valves
For any other support request please get in touch.