This question is regarding Mira Excel Wall and Deck Bath Shower Mixers - Shower Spares

Mira Excel shower

The hot water dial now needs to be turned nearly to the maximum in order to get a high enough temperature, whereas previously half way was sufficient. The fitting is about 18 years old, therefore it may need replacing. Is it still available and if so, please provide me with details of price etc.
Asked 4 years ago by Anthony Leaf, Northwood
This is not a thermostatically controlled shower, therefore if the inlet temperature hasn't changed, then I suspect that the filter on the hot side of the valve may be partially blocked,therefore not allowing enough hot water into the valve.

Answered 4 years ago by George Thomson

Thanks for your helpful reply but I don’t know how to access the filter to clean it. The hot water dial is on the shower wall with a backing plate behind it.

Anthony Leaf

Answered 4 years ago by Anthony Leaf

The filters are in the inlets you need to turn the water off and remove the shower from the wall.

Answered 4 years ago by George Thomson

View Spares and Order Parts:

Do you need additional help to find the correct part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Excel Wall and Deck Bath Shower Mixers - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Tap Spares page. Alternatively, if you're looking for any other brands you should view our full range of Tap Spares.

For any other support request please get in touch.