This question is regarding Mira Extreme Thermostatic - Shower Spares

mira extreme thermostatic shower

Shower keeps cutting out, then you cant turn it off but most of the time its it works in 10-20 second showers then you wait 5-10 seconds then it works again ad sometimes it dont work at all. The temperature is fine though. Any answers Doc.
Asked 10 years ago by Anonymous

If when you switch off the shower at the mainisolator and the shower keeps running then you have afaulty solenoid.

http://www.youtube.com/watch?v=NzJjzWqxesc

When you switch off the shower at themain isolator and the waterstops running, then you have a faulty on/off switch or a faulty PCB or a micro switch that is stickingon.

Answered 10 years ago by Anonymous

Hi,



The indicator lights from our Mira Extreme light up when we turn the shower on (Low/Medium/High) but there's no water coming out. I've checked the solenoid & the reading is 3.50k ohms. Although there is a lot of carbon dust within the unit (which I've now cleaned with compressed air), the carbon brushes from the motor don't appear to be well worn.



Would you be able to advise what else to check in order to identify the faulty part for replacement?



Your help is greatly appreciated!

Thanks in advance!



Ben

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Extreme Thermostatic - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Power Showers

For any other support request please get in touch.