This question is regarding Mira Fino/Verve Flow Cartridge Assembly - 451.04

Mira fino

I have a Mira fino exposed when I turn on water lever no water comes out hot or cold what would be the problem?
Asked 7 years ago by Alexander
It is likley to be a faulty cartridge, however I would first of all check that the filters are clean also when you are doing that it may be worth giving the pipe work a flush out.

Strip out the cartridge

When it is out give the pipe work a flush out.

This will take two!

If your valve is recessed pack an old poly bag round the valve to divert the water into your Bath / shower tray then turn the hot and cold valves on one at a time and allow the water to flush through for about 15>20 seconds.

The person who is helping you should watch that the water is not going anywhere that is going to do any damage. Also they should watch that the amount of water coming from the hot and cold they should be roughly the same.

Answered 7 years ago by George Thomson

View Product and Order Online:

Do you require any further help with Tap or Shower Cartridges?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Fino/Verve Flow Cartridge Assembly - 451.04

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Cartridges page. Alternatively, if you're looking for any other brands you should view our full range of Cartridges.

If you would like to buy this cartridge or look others from the same brand, please view our Replacement Mira Cartridges (All)

For any other support request please get in touch.