Mira Fino Shower lever

How do I remove the lever to inspect it it is getting very stiff
Asked 8 years ago by Ted
1. Turn off the water supplies and open the shower control to relieve the trapped water pressure.

2. Remove the hose from the lever retainer.

3. Unscrew and remove the lever retainer using a 12 mm A/F hexagonal key or the quad key. Remove the flow control lever and the wave washer.

4. Undo the flow cartridge retaining nut using a 30 mm A/F spanner and pull out the flow cartridge. Note! Before installing a new flow cartridge make sure that the 'O' seals are correctly installed.

5. Fit the new flow cartridge into the valve body.

6. Fit the wave washer, the flow control lever and secure in place with the lever retainer.

7. Fit the hose to the lever retainer.

Answered 8 years ago by Anonymous

View Product and Order Online:

Do you require any further help with Tap or Shower Cartridges?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Fino/Verve Flow Cartridge Assembly - 451.04

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Cartridges page. Alternatively, if you're looking for any other brands you should view our full range of Cartridges.

If you would like to buy this cartridge or look others from the same brand, please view our Replacement Mira Cartridges (All)

For any other support request please get in touch.