mira gelana knobs
Fittinga more powerful shower to the existing wiring.
If yourexisting shower was installed with 6mm wiring (as it should have been) thenfitting another shower (even up to one of the 10kw units) to the existing wiringshould be no problem, depending on the length of the run off cable and how thecable is installed.
Here isa table that allows you to work out what you can do with the existing wiring,make sure you fill it in accurately as this can make a large difference to theeventual calculation.
http://www.tlc-direct.co.uk/Technical/Charts/VoltageDrop.html
You mayalso have to change the fuse
Up to8.5kw 35 Amp fuse
Up to9.5kw 40 Amp Fuse
Up to10.5kw 45 Amp Fuse
If youare even in the slightest unsure about any of the above then please contact anelectrician.
Answered 10 years ago by Anonymous
View Spares and Order Parts:
Mira Galena Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Mira Galena - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers
For any other support request please get in touch.