MIRA GO

WILL NOT ADJUST TEMP GOES FROM COLD TO HOT NO ADJUSTMENT
Asked 13 years ago by Anonymous
This is almost certainly a flow problem.
Check that the shower hose is not kinked or collapsed internally and the head is clear.
Check that water mains stopcock and any isolation valve in the supply to the shower are fully open.
Check inlet filter is clear.
If all above are ok then it is likely to be the flow regulator at fault , replacement can be ordered online by clicking on the link below

http://www.showerdoc.com/shower-spares/mira/MIRA-439-78-Mira-Flow-Regulator-Assembly-(9-5---10-8kw-Models)-439-78

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Go - post 2007 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.