Mira GO

Hi there I've got a 3 year old Mira go shower, after switching on , it's runs as nirmal for approx 3 mins and then stops !!! If u try and press power switch. It makes no difference. But left for a while it will do same and cut off. Any ideas thanks in advance Andy
Asked 8 years ago by Andy
It may be your solenoid valve, you can check it if you have a multi meter, you should have a reading of at least k3.5 ohms, across the two terminals any less and you need a new valve. (Check the valve in the failed state.) (When it has stopped working!)

If there is power getting to the solenoid and it is not operating then there is a good chance that you have a faulty solenoid.

www.youtube.com/watch?v=NzJjzWqxesc

The video is intended as a guide and does not cover every shower.

If you don’t have a multimeter we sell them with a guide on how to use them for checking and testing the various parts of your shower.

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses and letting you know much power you have left in batteries

(So you will know if they are good or not) and lots of other jobs, in short they are well worth a few pounds

www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

Answered 8 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Go - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.