This question is regarding Mira Go - Shower Spares

mira go 9.5 only heats when temp set to full

Hi, my mira go shower has started to play up, normally I have the temp set to half way but recently at this setting the water is cold I have to turn it up to nearly full but then the water is to Hot! There doesn't seem to be an in between, water full appears consultant when not or cold.



Could a faulty Tco cause This? I have tested it and the heater element and both seem ok, heater elements read about 11 ohms
Asked 10 years ago by Anonymous

Forgetting about the temperature, turn the showerfrom fully hot to fully cold. At fully hot you should have not much more than adribble coming from the hose, and on fully cold you should have a good strongflow. If you do not have this difference then you may have a faultyflow/stabilizer valve.

Answered 10 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Go - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.