Temperature too hot

I have a Mira jump that has become extremely hot on its normal setting, the only way I can get the temperature to an acceptable level is to turn it to eco mode and turn the temperature control down slightly, whilst doing this I notice the temperature control does feel quite nothchy around where it used to sit if this is of relavance? On the setting it was previously on the water becomes almost scalding and too hot to keep your hand under, although there is still a reasonable flow of water.. Thanks
Asked 7 years ago by Gary
Turn the shower temperature control from fully cold to fully hot. When you do this slowly there should be a gradual change in temperature and flow. At fully hot you should have not much more than a dribble coming from the hose, and on fully cold you should have a good strong flow. If you do not have this difference, or the flow or temperature is erratic, then you may have a faulty flow/stabilizer valve.

Answered 7 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Jump (MK1) Electric Shower - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.