This question is regarding Mira Magna Pumped Digital Mixer - Shower Spares

mira digital mixer poor temp flow control

When I press the warm up button shower starts water gets hot and it stops itself but the water flow rate as it is doing this is the same as the low setting. works fine on low setting. flow rate on medium is just dripping. And on high flow rate is the same as low setting . I have swapped the controller leads with the other shower as we have 2 of these in one bathroom and mixer still acts the same and the controller works the other shower fine. Question is what parts is most likely to cause this fault ?
Asked 10 years ago by Anonymous

First check that the filters are clear and the check valvesaren’t sticking (Part 7)

Failing that it is likely that the valve assembly is faulty,you are fortunate in that you can swap the valve assemblies just to check as itis a fairly expensive part.

Answered 10 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Magna Pumped Digital Mixer - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Digital Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Digital Showers

For any other support request please get in touch.