Mira

Mira Minilite Eco EV Exposed Thermostatic Mixer with Shower Kit (Chrome)

Product Code: ZMIRA-1.1663.239

Product Discontinued
This product has been discontinued and is no longer available.

We have sold our remaining stock and there are no direct replacements, however if you wish to discuss your options, please do not hesitate to contact us

You might also be interested in

(52)

The Shower Doctor Silicone Grease (30ml Tub) - MCSILICONE

R.R.P £4.79
Our Price
£3.36
Sale
In Stock
(7)

Universal Superstrong Shower Hose 150cm - 52820

R.R.P £16.80
Our Price
£10.96
Sale
In Stock
(8)

Euroshowers C-Jet Wras Approved Chrome - 56620

R.R.P £16.80
Our Price
£13.80
Sale
In Stock

Product Description

Mini size, maximum performance. Beautifully compact, but with a powerful punch, the thermostatic technology and simple to use single controls on the Mira Minilite range make it idea for all the family.

  • Thermostatic temperature stability keeps showering safe for all the family
  • One single control for flow and temperature creates a clean, minimal look
  • Single-spray showerhead with a rub-clean rubber nozzle makes cleaning easy
  • Minilite Eco EV and BIV are approved by the BMA and Waterwise as water-efficient products – saving up to 50% water compared to the standard Minilite
  • EV models come with 110mm pipe centres. If your existing pipework is between 133-153mm you can buy an optional extended elbows pack
  • Can be fitted to falling, rising and rear entry supplies
  • Eco showers are not TMV2 approved because of the flow regulator.

Product Specification

  • Colour: Chrome
  • Depth: 113mm
  • Fitment Style: Exposed
  • Flow Limited: 12 litre/min
  • Guarantee: 3 Years
  • Height: 76.5mm
  • Inlet Connection: 15mm Compression
  • Minimum Running Pressure: 0.1 Bar
  • Plumbing System: Low Pressure
  • Temperature Control: Thermostatic
  • Water Entry: Back
  • Width: 130mm

Technical information
Limitations of Use

Mira Minilite should not be used for applications where an outlet flow control forms part of the shower fitting.

Application
Mira Minilite is suitable for installations as part of the following plumbing systems:
Gravity fed
Fully modulating instantaneous gas heated
Mains pressurised (heated from a thermal store).
Unvented mains pressure
Pumped
When the Mira Minilite is used with mains pressure appliances at pressures above 5 bar maintained, a drop-tight pressure reducing valve must be installed to maintain performance.

Supply Conditions
Recommended hot inlet supply temperature 55°C – 65°C
Maximum hot temperature: 85°C (maximum recommended is 65°C ref BS6700)
Recommended cold water temperature 5°C – 25°C
Minimum cold temperature 1°C
Hot and cold supplies to be at a nominally equal pressure.
Minimum maintained pressure:  0.1 bar
Maximum maintained pressure: 5.0 bar
Maximum static pressure: 10.0 bar

Performance
The specification performance outlined below is achieved with inlet water supply temperatures of 15°C cold and 65°C hot, the mixed temperature in the range 35°C – 45°C and nominally equal inlet supply pressures.
Temperatures selection range: Full cold to preset maximum (factory set at 43°C) but can be easily reset depending on the site conditions.
The blended water temperature is typically within 2°C with a 10°C change in either hot or cold supply temperatures.
Shutdown to seepage in typically two seconds if either the hot or cold supply fails, provided the hot supply is more than 12°C above the blend temperature.
The blended water is maintained within a 2°C range, when the pressure of either supply is reduce by 50% (0.5 bar maintained).
For high pressure supplies, a 12l/min flow regulator (supplies) should be fitted to the outlet.

Maintenance

This product is designed to be maintenance free apart from inlet filters which should be cleaned regularly.
Maintenance should be carried out in accordance with the information in the Installation and User Guide, supplied with each product. This guide should be retained by the user for future reference.
Conveniently situated isolating valves must be fitted in the supply pipework to allow complete maintenance of the product.

Guarantee
Guarantee for three years from date of purchase against faulty materials or workmanship.

Installation
The plumbing installation must comply with requirements of UK Water Regulations/Bylaws (Scotland), Building Regulations or any particular regulations and practices specified by the local water company or water undertaker.
The installation should be carried out by a plumber or contractor who is registered as a member of an association.
Protect the product from damage when soldered connections. Some fluxes may cause damage to plastic components.

Mira Minilite Surface-mounted (shower control only)
Inlet elbows accept falling rising or rear entry supplies
Inlet pipe centres: 110mm
Inlet connections: 15mm compression
Outlet connection: ½” BSP flat face
Reversed inlet supplies supported
Alternative top or bottom outlet supported

FAQs (1)

Do you have a question regarding this product?
Call us directly 0131 538 4343 or click the button to ask us a question.


Ask a Question

REVIEWS

Have you purchased this product from Shower Doctor?
Why not leave a review here and help other buyers that are looking.

Submit a review for this product

Be the first to write a review about this product.