This question is regarding Mira Orbis - Shower Spares

Mira orbis 10.5

Hi, we have the above shower and have replaced various parts from yourselves. I have an unusual problem that after 8-10 minutes on occasion it runs cold. No low flow warning or anything but if you turn it off, leave it 30 seconds turn it back on it flows warm again. Any ideas? It is a 2012/2013 model I think
Asked 5 years ago by Tony
Yes a bit unusual

The things to check first are:

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

3 Check the inlet filter on the shower

Also take a note of the time that this is happening, could there be a draw on the main supply causing the pressure to dip.

Answered 5 years ago by George Thomson

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Orbis - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.