This question is regarding Mira Orbis - Shower Spares

Temperature regulator

My 'Mira Orbis' shower suffers issues with temperature regulation. On an older Mira shower I once had the same problem and was able to replace the temperature regulator. However I don't see any such part listed. Which part controls the temperature regulation?
Asked 9 years ago by Alex

The temperature regulator is connected to the heating tank assembly which is fairly expensive, try these checks below first.

The things to check first are:

1 That the main valve coming into your house is fully open. 

2 Then check that the valve on the line to the shower is fully open. 

If these valves are not fully open then there may not be enough water getting to your shower to cool it properly the overheat safety device will turn the power off until it cools Then it all starts again

 

Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally 

The other possibility is a the temp regulator valve not allowing the correct amount of water into the shower. 



Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Orbis - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.