This question is regarding Mira PPT3 - Spare Parts

Mira ppt3 runs constantly

Pump runs constantly when powered, no visible leaks from the pump/shower. The mix can also be "dodgy", i.e. cold is def lower than hot, sometimes have to turn the mixer valve back to get the cold pumping. Is this something a novice can repair or time to get a new pump?
Asked 12 years ago by Anonymous

First remove and clean the Magnetic floats.


http://www.showerdoc.com/shower-spares/mira/MIRA-PARENT-126-Mira-PPT3


http://www.showerdoc.com/shower-spares/mira/MIRA-937-33-Mira-Magnetic-Float-Pack-937-33


If the floats are Ok


Then the problem may be with the sensors


http://www.showerdoc.com/shower-spares/mira/MIRA-937-42-Mira-Wire-P3-Pack-937-42

You could try removing them and see if this stops the pump running then refitting them one at a time to see if the pump runs or not, by doing this you should be able to establish if these are faulty or not.

 

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira PPT3 - Spare Parts

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Shower Pumps Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Shower Pumps

For any other support request please get in touch.