This question is regarding Mira Sport 10.8kW - post 1998 - Shower Spares

Low flow

My Mira Sport shower has recently begun cutting out with the low flow warning light coming on. I have tested the solenoid and the first time I measured it I got 3.6kohms. However after the last test after the flow cut out I was measuring open circuit. Does this mean the solenoid has failed? Thanks Iain
Asked 7 years ago by Iain
Normally solenoid coils start to fail intermittently so this could be the case. As long as the water is cutting off and not the heat and you are still getting cold water then i would say you have a faulty coil.

You will find a new coil and a video on how test them vis this link provided - www.showerdoc.com/mira-solenoid-coil-assembly-spare-416-51

Alternatively you can replace the flow valve that incorporates the coil so you are covering more ground for if you have a faulty flow valve too.

Answered 7 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport 10.8kW - post 1998 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.