No water coming from shower

low flow light ON- Filter clean- water supply to shower good
Asked 12 years ago by David
Sounds like the solenoid coil has failed, if you click on the link below you will find a video clip showing how to test and replace plus order online. If it is not the solenoid coil then it is most likely to be the printed circuit board which can be ordered online by clicking on the second link

http://www.showerdoc.com/shower-spares/mira/MIRA-416-51-Solenoid-Coil

http://www.showerdoc.com/shower-spares/mira/MIRA-415-48-PCB-Assembly

Alastair

Answered 12 years ago by Anonymous

Sounds like it could be the solenoid coil if you click on the first link below you will find a video clipwhich will tell you how to check and replace, if the coil is ok then it is likely to be the printed circuit board which can be ordered online by clicking on the second link.

http://www.showerdoc.com/shower-spares/mira/MIRA-416-51-Solenoid-Coil

http://www.showerdoc.com/shower-spares/mira/MIRA-415-48-PCB-Assembly

Alastair

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport 10.8kW - post 1998 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.