This question is regarding Mira Sport 10.8kW - post 1998 - Shower Spares

Overheat light comes on

Dear Sirs,

the overheat light comes on this shower, I have descaled the shower head, the hose is in good condition plus the water pressure is good as another, same model works fine in the next room. Can you recommend an internal part that can be fitted to rectify this problem.

Kind regards,

Jon Stewart

Asked 9 years ago by John
Turn the shower temperature control from fully cold to fully hot. When you do this slowly there should be a gradual change in temperature and flow. At fully hot you should have not much more than a dribble coming from the hose, and on fully cold you should have a good strong flow. If you do not have this difference, or the flow or temperature is erratic,  then you may have a faulty flow/stabilizer valve.

Answered 9 years ago by Anonymous

I put the shower on medium setting and turned the temp from low to high I had a good force on low and as I turned to high the force did reduce a lot. I had a low force on the low setting as apposed to a dribble.



what is the problem and which part would I need to replace

Answered 8 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport 10.8kW - post 1998 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.