Some extra information
Call us on 0131 538 4343

Mira power sport max 10kw overheat problem

This question is regarding Mira Sport Max Shower Spares

When you have the hot then cold then overheat light problem, could this not be the thermal switch?

Asked 5 years ago by Anonymous

 The things to check first are:

1 That the main valve coming into your house is fully open. 

2 Then check that the valve on the line to the shower is fully open. 

If these valves are not fully open then there may not be enough water getting to your shower to cool it properly the overheat safety device will turn the power off until it cools Then it all starts again Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally 



 
 
Answered 5 years ago by George Thomson
View Spares and Order Online:
View Spares

You send it, we mend it.