This question is regarding Mira Sport Max - Shower Spares

Mira Sport low flow light, cuts out after 3 minutes.

I have a Mira sport shower, after 2-3 minutes the shower stops with the low flow light illuminated.

Do you have any suggestions?
Asked 13 years ago by Anonymous
When it stops check there is a minimum of 230volts at the connector block in the unit, if not the isolation switch has gone high resistence and needs replacing.
If power ok the iy is likely to be the flow valve which can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/mira/MIRA-1563-508-Mira-Flow-Valve-Assembly-10-8-Kw-1563-508

Answered 13 years ago by Anonymous

Have had a MIRA Sport 9.0kW Shower recently installed after having laid undisturbed in original box for 16 years! Model no.J92B 020199. Unfortunately when shower switched on almost immediately water flow stops (in seconds) and low flow light illuminates. From reading your previous answers to queries it is possible that flow valve assembly may need to be replaced part no. 1563.507. Do you stock this part or will 1563-508 used in 10.8kW models be suitable?

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport Max - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.