Mira Sport Max 10.8Kw

Low Flow light comes shows on High & Mediium, no flow light on low, water running on all settings but cold. Replaced solenoid, no change, replaced flow valvle assembly, now no water on all settings, put assembly back in, still no water on all settings, think it has something to do with arm activating the microswitch at bottom on PCB, what am I missing? Please can you help?
Asked 10 years ago by Matthew
Check the inlet filter is clear. And you have water and power (230-240v ) to the shower.

If all is ok then you may have a faulty PCB.

Answered 10 years ago by Anonymous

I managed to fix by taking the shower off the wall to examine the position of the arm that presses the microswitch and gently forcing the arm so it presses the microswitch with ease to make sure nothing was blocking it when flow valve operated correctly. Put it back together and all worked fine.

Answered 10 years ago by Matthew Mcleod

ON LOW, MEDIUM AND HIGH SETTING THE WATER IS RUNNING COLD AND THE OVERHEAT LIGHT IS ILLUMINATED - WHAT COULD BE THE PROBLEM

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport Max - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.