mira sports post 92

shower running hot and col
Asked 12 years ago by Mr

Probably a faulty Pilot valve

 

The pilot valve is a common fault

 

Turn off water and power

 

Put something in the waste just encase you drop a screw!

 

Remove cover

 

Remove splash plate at pipe entry

 

Remove 4 screws from 'U' clamps and 'U' clamps

 

Later models have “Torx” screws so you will need a “Torx” screwdriver with a T10 Bit.

 

Remove screw above letter 'A' on drawing

 

 

Ease pilot valve forward (if there is no movement on the pipe work you will have to disconnect it at the inlet connection take care to hold the brass body with pliers when slackening the nut)

 

Swap the wires over from one pilot valve to the other one by one

 

Then reassemble

 

Turn on water and allow the water to come thru unit before switching on power.

 

Easy init!!!!!

Link to Pilot valve

http://www.showerdoc.com/shower-spares/mira/MIRA-419-87-Pilot-Valve

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport - post 1992 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.