Water flow

Low flow light stays on all the time in all settings
Asked 13 years ago by Nigel
If the shower is operating correctly other than this then the problem is likely to be the 3 pin microswitch that operates the light.
If it is a real low flow situation then check that mains stopcock and any other valve in the feed to the shower are fully open and that the inlet filter is clean.
If all these are ok and there has been no reduction in water mains supply pressure then a new flow valve is required.
Any parts required can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/mira/MIRA-PARENT-18-Mira-Sport---post-1998

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport - post 1998 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.