This question is regarding Mira Sport - post 2006 - Shower Spares

Mira sport 9.0kw

what part has failed if the water starts of warm then gets over hot then just runs cold.
Asked 13 years ago by Anonymous
Check that the hose is not kinked or collapsed internally and the head is clear.
Check that the water mains stopcock and any isolation valve in the feed to the shower are fully open.
Check that inlet filter is clear.
Check there has not been any reduction in flow/pressure of mains supply.
If all above are ok then it is likely to be the flow valve at fault, a replacement can be ordered online by clicking on the link below but remember to check whether you also need a low flow neon and a switching assy.

http://www.showerdoc.com/shower-spares/mira/MIRA-1563-507-Flow-Valve-Assembly

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport - post 2006 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.