This question is regarding Mira Sport - post 2006 - Shower Spares

Sport 9.0kW will not turn on.

Isolator is fine, voltage arriving at the shower is fine, the power light is illuminated but as soon as you push the on button this goes out and there's no water flow. No sounds like anything is happening.



I've checked continuity at various places - the on/off switch appears to be fine but there's no continuity over the thermal switch - should there be?



What else to check please?
Asked 10 years ago by Arc

Yes there should be continuity through the thermal switch.

 

However if the light is going out when you try to turn iton, you may have a faulty neutral in the isolating switch the connection willbe good enough to give you a reading but not when you try to draw power.

Answered 10 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport - post 2006 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.