This question is regarding Mira Sport Thermostatic - Shower Spares

mira sport shower fault

hi, i have a mira sport 9kw which runs hot then cold and so on, can go cold and heat up again during use several times, cheers andy
Asked 12 years ago by Anonymous
This is almost certainly due to a lack of flow.
Check thatb shower hose is not blocked or collapsed internally and the head is clear.
Check incoming water mains stopcock and any isolation valve in supplt to shower are fully open.
Check that filter in inlet connector is clear.
Check with your supplier that there has not been a reduction in supply flow or pressure.
If all above are ok then it is likely to be the flow valve at fault , replacement can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/mira/MIRA-1563-507-Mira-Flow-Valve-Assembly-1563-507

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sport Thermostatic - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.