This question is regarding Mira Sprint - post 2000 - Shower Spares

Mira Sprint (8.5kw)

Hi,

I have just had a water pressure reducing valve installed on the mains water.

However, now when I switch on the shower I get a screeching noise from the temperature controller. Sometimes it will go off after a few seconds and other times I need to adjust the temperature knob.

The pressure is now lower than it was before so I don't know why the screeching has occurred.

Also if I do need to replace the temperature valve is there a part number?

Regards Steve

Asked 11 years ago by Anonymous

You are really looking for a minimum of 1bar pressure tomake this work properly so first check that –you have at least that coming throughthe pressure reducing valve.

It may be that some dirt has come through and caused aproblem with the flow valve or just coincidence that the flow valve has becomefaulty when the pressure has changed.

http://www.showerdoc.com/mira-flow-valve-assembly-comes-with-coil-and-switch-1563-507

Answered 11 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sprint - post 2000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.